This combination Beretta Closer with Door Patch requires no holes or notches in the glass, and can be installed in the floor or overhead. When used in the floor, it can handle up to a 176 lb. (80 kg) door with a maximum width of 35-1/2″ (902 mm) by 94-1/2″ (2.40 m) tall. When used overhead, the maximum weight of the door is reduced to 155 lbs. (70 kg) with a maximum width of 32″ (813 mm) by 87″ (2.21 m) tall.
Install the Closer along with any of the Door Patches, and simply slide your glass in, tighten the set screws and you are done, it’s that easy!
Product Warning:
STRUCTURAL DISCLAIMER – All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
Door using this closer should not have door stops.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.
Handed
Right
Type
Closer With Door Patch
Finish
Brushed Nickel
Material
Brass
Hold Open
90
Glazing Thickness
3/8, 1/2
Finish/Color
Brushed Nickel
