Made of solid brass, and available in numerous stock finishes, these CRL No-Drill Fixed Panel Clamps provide an alternative to Clamps requiring drilled holes or notches in the glass. Two nylon tipped set screws are tightened to secure the glass. Mounting screws are also provided for the wall/ceiling/floor. Silicone must also be used for reinforcement along all glass edges where Clamps are used.
IMPORTANT NOTE: Do not hinge a door off a fixed panel using these Clamps. Clamps must be used on minimum of three sides of fixed panel (top, bottom, and at least one side). Silicone must be used for reinforcement along the entire edge of the glass where Clamps are used. It is the responsibility of the installer to determine if adequate structural backing support is being used.
SPECIFICATIONS:
Glass Thickness: 5/16″ to 3/8″ (8 to 10 mm)
Material: Solid Brass
Includes: Mounting Screw and Clear Gaskets
No Glass Fabrication Required Important Notes: Do not hinge a door off a fixed panel using these Clamps. Clamps must be used on minimum of three sides of fixed panel (top, bottom, and at least one side). Silicone must be used for reinforcement along the entire edge of the glass where Clamps are used. It is the responsibility of the installer to determine if adequate structural backing support is being used.
O.D. Depth
3/4 in (19 mm)
O.D. Height
1-1/8 in (28 mm)
Width
1-3/16
Depth
1-3/16″ (30.2 mm)
Size
2-3/8″ (60 mm) Wide x 1-1/8″ (28 mm) High
Glass Thickness Range
3/8″ or 5/16″ (10 or 8 mm)
Height
3/4
Finish
Polished Brass
Mounting Type
Wall Mount
Material
Brass
Length
2-3/8
Glazing Thickness
5/16 To 3/8
Finish/Color
Polished Brass
Mounting Style
Wall mount
