CRL Top Gate Patch Fittings are used with all three of our gate and door pivots. It fits in the upper corner of the gate’s glass panel, and requires a hole and cut-out in the glass. Available in brushed stainless steel finish, it comes complete with instructions and a glass cut-out template.
The following guidelines are to be used when making a door using this hardware:
Maximum Height: 102″ (2.59 m)
Maximum Weight: 194 lbs. (88 kg)
Maximum Width: 42″ (1.07 m)
If the door exceeds any of these limitations, full door rails should be used.
GLASS FABRICATION REQUIRED:
One 3/4″ (19 mm) Diameter
Hole and Corner Notch
COMES WITH:
Template and Instructions
Do Not Use With:
PH42L, PH42R, PH43L or PH43R Transom Patch Fittings. They Require European Door Patch Fitting PH21A.
Product Warning:
These fittings are not for use with Laminated Glass.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.
Shipping Weight
1 lb (454g)
Finish
Dark Bronze
Maximum Panel Weight (Pounds)
194
Pivot Backset (Inches)
2-3/4
Height
2
Maximum Width
42
Works with
1NT303
Glazing Thickness
3/8 , 1/2
Length
6-7/16
Finish/Color
Black Bronze Anodized
Maximum Door Height
102
Type
Top
Insert Type
1NT303
Maximum Panel Weight
194 lbs. (88 kg)
Pivot Setback
2-3/4
With Insert
Yes
