CRL Swivel Drill Machine is specially designed to make cut-outs for plug and switch receptacles. It comes with a suction cup base that acts as a coolant retainer when drilling with Diamond Tube Drills. Drill first hole, insert rubber plug, swivel drill head, and then drill second hole. It can be used for drilling larger holes with tube drills up to 6:(152mm). Drill Machine offers a full 360-degree operation that enables it for drilling up to the close to glass edge. It is simple to operated. Machine is powered by a 1000 RPM, 110V AC motor. CRL Swivel Drill Machine has rigid construction that offers durability for long time. This also lets you use drills larger in diameter than will fit in the built-in retaining ring. Important Notes Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury. DS 06/27/2016
From Manufacturer
This unique drilling machine was designed primarily to make cut-outs for plug and switch receptacles. The CRL Swivel Glass Drilling Machine has a suction cup base that also acts as a coolant retainer when drilling with diamond tube drills. Drill first hole, insert rubber plug, swivel drill head, and then drill second hole.
Can also be used for drilling larger holes with tube drills up to 6″ (152 mm) in diameter. Drill head has the unique ability to swing a full 360 degrees so drilling up close to the glass edge is made easy. This also lets you use drills larger in diameter than will fit in the built-in retaining ring. Machine is powered by a 1,000 RPM, 110V AC motor.
ACCESSORIES AND REPLACEMENT PARTS (sold separately)
CRL Cat. No. – RP20
CRL Cat. No. – RR15
CRL Cat. No. – RR24
CRL Cat. No. – RR30
CRL Cat. No. – RR45
CRL Cat. No. – RR65
CRL Cat. No. – SDM03G
Product Warning:
Always wear the proper safety gear including gloves and eye protection when drilling glass. Work should be performed on a flat, horizontal surface. A Ground Fault Circuit Interrupter must be used when using any type of electric tool in conjunction with water or coolant. Failure to follow any of these precautions can result in operator injury.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.
Shipping Weight
14 lb (6.35kg)
Voltage
110V AC (Motor)
Drill Hole
Up to 6 (Diameter)
For Use On
Glass
Speed (rpm)
1000
Speed
1000
