CRL Z-Series Clamps are available in your choice of round or square shapes, and come in either economical zinc construction, or durable stainless steel construction. CRL’s Z130 series glass clamps will accommodate glass thicknesses from 1/4″ to 5/16″ (6 to 8 mm). The radius base is designed to apply on 2″ (51 mm) tubing. By drilling a notch in the glass, the pin included with each clamp can be used to eliminate glass slippage. Popular applications are partitions, mezzanines, wind breaks, railings and other commercial uses. CRL Cat. No. ZB0LT (Bolt) and Cat. No. ZRNUT (Rivet-Nut) are used for securing z-clamp to tubing. Appropriate gaskets are included with each clamp. A variety of finishes are offered to match most any commercial decor.
Glass Fabrication: 1/2″ (12 mm) notch is required if using provided steel pin.
Replacement Hardware : CRL P612 for Replacement Screws
Product Warning:
For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.
Brass Finish Advisory: Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.
Height
1-3/4
Shipping Weight
1 lb (454g)
Width
1-3/4
Glass Thickness
1/4″ to 5/16″ (6 to 8 mm)
Finish
Polished Brass
Material
Brass
Type
Small
Depth
29/32
Glazing Thickness
1/4 To 5/16
Profile
Square
Finish/Color
Polished Brass
