The CRL Fletcher 1/4″ and Thicker Float Glass Cutter is widely used in the glass industry. It has a ball end handle that is very popular with professional glazier’s and also features a 130 hone angle on the wheel with a phosphor bronze axle, the finest known bearing for glass cutter wheels.
Designed especially for float glass, these cutters are very smooth and produce a clean edge. The wider hone angle on the cutting wheel of this cutter reduces flaking and slivering when cutting glass up to 3/8″ (10 mm) thick. Handle is stamped 02A.
Each cutter goes through 28 operations with 9 key inspections during the manufacturing process. Then they are tested on glass individually to make sure a smooth, clean cut edge is produced. Individually boxed and packed in dozens.
Product Warning:
Always wear the proper protective gear when cutting glass. Failure to do so can result in injury.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer’s video card and on how your monitor’s color is adjusted.
Hone Angle
130º
Glass Thickness
1/4″ to 3/8″ (6 to 10 mm)
Brand
Fletcher
Glazing Thickness
1/4 To 3/8
Hone Angle (Degrees)
130
Wrist Circumference
1/4 in. To 3/8 in. (6 mm To 10 mm)
